Nikon LS-30 Bedienungsanleitung PDF herunterladen (Seite 35)

- 35 -

Using the Scanner: Using the SA-20 STRIP FILM ADAPTER

Using the SA-20 STRIP FILM ADAPTER

35 mm film-strips of from two to six frames in length can be

scanned using the strip-film adapter. Insert the adapter into the

scanner’s adapter slot as shown below, sliding it in until it con-

tacts the back of the slot. Push the adapter until the connector

on the rear of the adapter is seated securely in the socket at the

back of the slot.

A plastic tray is provided with the strip-film adapter to catch film

ejected from the scanner. If the scanner has been installed on

its side, this tray can be attached to the adapter by inserting the

hooks on the back of the tray into the holes provided on the

bottom of the adapter and then pulling the tray slightly forward.

1. Insert hooks

2. Pull forward to latch

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 48 49

Keine Kommentare

Nikon LS-30 Bedienungsanleitung Seite 35