Nikon LS-30 Bedienungsanleitung PDF herunterladen (Seite 32)

- 32 -

Using the Scanner: Using the MA-20 SLIDE MOUNT ADAPTER

Using the FH-2 to scan strip-film

The SA-20 STRIP FILM ADAPTER is provided to scan 35 mm film in

strips of from two to six frames. The SA-20’s automatic feed

and eject mechanisms however require film that is flat, cut

straight across at the ends, free from adhesive tape and has all

perforations intact (see “Using the SA-20 STRIP FILM ADAPTER,”

following). Film that cannot be scanned using the SA-20 can be

scanned in the MA-20 using the FH-2 strip-film holder provided

with your scanner. This section details how to insert film in the

FH-2 and scan it using the MA-20.

Step 1—Open the FH-2

Holding the FH-2 with the “Nikon” logo facing upwards, unlatch

the holder by the snaps and flip it open.

Step 2—Place film in the holder

Place a strip of 35 mm film on the lower holder, oriented so

that the frame numbers are not reversed. Align each frame in

the film with an aperture in the lower holder.

Holder snaps

Film strip

Lower holder

Aperture

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 48 49

Keine Kommentare

Nikon LS-30 Bedienungsanleitung Seite 32