Nikon LS-30 Bedienungsanleitung PDF herunterladen (Seite 17)

- 17 -

Setup

This chapter explains how to set up your scanner and connect

it to a computer. Before using your scanner, you will need to

complete the following steps:

• select a suitable location for the scanner

• remove the transport locking screws

• connect the power and SCSI cables

• set the SCSI ID

These steps are described in the sections that follow.

Installation

Before connecting the LS-30 to your computer, choose a flat,

stable location for it, free from vibration and dust. Do not

install your scanner where:

• it would be exposed to direct or

reflected sunlight

• it would be subject to condensa-

tion or drastic changes in tempera-

ture

• the temperature exceeds 35ºC

(95ºF) or falls below 10ºC (50ºF)

• other objects might block the

scanner’s vents

• it would be subject to radio interference from other elec-

tronic devices

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 48 49

Keine Kommentare

Nikon LS-30 Bedienungsanleitung Seite 17