Nikon LS-30 Bedienungsanleitung PDF herunterladen (Seite 27)

- 27 -

Using the Scanner: Turning the Scanner On

Using the Scanner

This chapter covers basic scanner operations, from turning the

scanner on to replacing adapters and inserting and removing

film. Actual scanning is outlined in the User’s Guide and de-

scribed in more detail in the software reference manuals.

Turning the Scanner On

Before turning on your computer, turn on the scanner and any

other peripheral devices. The scanner is on when the end of

the power switch labeled “1” is down.

When the scanner is turned on, the status LED will blink while

the scanner initializes. Initialization is complete when the LED

glows steadily. Once initialization has completed, turn on any

other peripheral devices and then start the computer.

Inserting and Removing Adapters

The LS-30 uses a variety of adapters to scan different types of

film. Adapters are provided for scanning single 35 mm slide

mounts and 35 mm film in strips of from two to six frames. An

adapter for scanning IX240 film is available for separate pur-

chase.

Any of these adapters can be mounted on the scanner while

the scanner is on and connected to a computer. To mount an

adapter, check that the status LED is glowing steadily. Adapters

can not be inserted or removed while the status LED is blinking.

Open the scanner’s front cover and slide the adapter in as

shown below, stopping when the adapter is firmly in place.

(The illustration above shows the slide adapter. The direction

of insertion for other adapters is shown below.)

Power switch on (“1” down)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 48 49

Keine Kommentare

Nikon LS-30 Bedienungsanleitung Seite 27