Nikon WP-N2 Bedienungsanleitung PDF herunterladen (Seite 58)

Grease the O-ring.

If the O-ring is not properly greased, it may

crack or peel, causing leaks. If the surface of

the O-ring appears dry, place a drop of silicon

grease on your index ﬁ nger and spread grease

on the O-ring by sliding it between your

thumb and index ﬁ nger, evenly covering the

ring. Do not use cloth or paper, as these may leave ﬁ bers on the O-ring.

Note that applying too much grease may cause foreign objects to ad-

here more readily to the ring, preventing the case from sealing properly.

Replace the O-ring.

Making sure the O-ring and guide are free

of foreign objects, place the O-ring so that it

runs evenly at the same level all the way round

the O-ring guide, without undue stretching

or twisting and without protruding from the

guide.

O-Rings

The O-ring requires periodic replacement. Replace the O-ring immediately if it is damaged,

cracked, warped, or has lost its elasticity. O-rings should be replaced at least once a year. Use

only silicon grease designated for use in this product; replacement O-rings and silicon grease

can be purchased from a Nikon camera retailer or Nikon-authorized service agent. Do not

use COOLPIX or NIKONOS O-ring lubricant (grease).

Cleaning

Do not use detergents or volatile chemicals such as alcohol or thinner when cleaning the

case or O-ring. Failure to observe this precaution could result in damage to the case or

O-ring.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 259 260

Keine Kommentare

Nikon WP-N2 Bedienungsanleitung Seite 58