Nikon WP-N3 Bedienungsanleitung PDF herunterladen (Seite 60)

Placing the Camera in the Case

Prepare the camera for underwater photography.

Insert the battery and memory card.

Insert a memory card and fully-charged battery.

Insert the camera.

Center the camera in the camera guides with

the lens positioned in the lens window.

Camera guides

The Camera Strap

To ensure that the camera strap does not get caught in the seal and cause a leak, be sure

to remove the strap before placing the camera in the case.

Underwater Flash Units

If you will be using an optional SB-N10 underwater ﬂ ash

unit, raise the camera’s built-in ﬂ ash before placing the

camera in the case, as once placed in the case the ﬂ ash

may fail to pop up on its own.

Insert desiccant.

To prevent condensation from forming in-

side the case, insert the supplied silica gel

desiccant between the bottom of the cam-

era and the case. Slide the desiccant to the

front, where it will not interfere with the case

closing. Improper placement could cause the

case to leak.

Replacing the Desiccant

Used desiccant loses its capacity to absorb moisture. We recommend replacing the

desiccant each time the case is used (

25).

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 311 312

Keine Kommentare

Nikon WP-N3 Bedienungsanleitung Seite 60