Nikon MFX-1930 Bedienungsanleitung PDF herunterladen (Seite 18)

4-4 Network Interface

50%, 64% and 70% are not available in 200dpi.

– or –

Press [Advanced Functions] repeatedly until “Zoom” appears, then

press [Enter]. Press [ ] or [ ] to adjust the zoom ratio.

– or –

Enter your desired ratio (50 to 200 %) using the numeric keys.

NOTE: • Enlargement scanning can only be performed using the docu-

ment glass.

• The minimum reduction ratio is 75 % at 200 dpi.

• To reset the settings to the default, press [Reset].

• Document type — Press [Doc. Resolution] then press [

] or [ ]

select the document type:

Text — Select this mode when scanning text.

Photo&Text — Select this mode when scanning documents containing

photographs or drawings and text.

Photo — Select this mode when scanning photographs or drawings.

• Contrast — Press [Contrast] to set how light or dark you want the

documents to be. To avoid confusing the Light and Dark settings,

just remember — “Light lightens” and “Dark darkens” — to keep it

straight.

Press [Start].

Select Scan Box

01:01

Press [ ] or [ ] to select the scan box, then press [Enter].

If the scan box has an I.D. code other than 0000, the following display

will appear, and go to step 6. Otherwise, skip to step 7.

01:Store Document

Enter I.D. Code:

****

Use the numeric keys to enter the scan box’s four-digit I D. code, then

press [Enter].

If you enter an invaild I.D. code the machine will return to the Standby

mode.

The machine will start scanning.

01:Store Doc.File: 1

A4 Mem100%

A ﬁle number is assigned to every document scanned into the scan box

(1 to 10).

File number

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 49 50

Keine Kommentare

Nikon MFX-1930 Bedienungsanleitung Seite 18