Nikon MFX-1930 Bedienungsanleitung PDF herunterladen (Seite 45)

6-1Network Interface

6. Troubleshooting

6.1 Troubles in network printer and scanner

Symptom Possible Cause Remedy

Cannot print Has the machine

been turned on?

Check that the power cord is ﬁrmly con-

nected and that the | (on) side of the power

switch has been pressed.

The LAN cable is not

connected ﬁrmly.

Check whether LAN cable is ﬁrmly con-

nected.

The LINK lamp of the LAN connector

illuminates when connected to the LAN (

“2 Installation”

page

2-1.) If not, LAN cable

may defective.

The wrong print-

ing port has been

selected

Open the printer properties dialog and

check that the printing port is correct. The

same IP address set on the machine should

be selected for the printing port.

Has the correct IP

address been set on

the machine?

Conﬁrm the correct IP address with net-

work administrator to set the correct one.

“Muratec MFX-1930

Network Scanner” is

not shown in scanner

device selection dialog

on an application

software.

Muratec network

scanner driver has

not been installed.

Install the driver.

“2 Installation” page 2-1.

Cannot open the scan-

ner dialog.

Has IP address on

the machine been

changed?

Conﬁrm the correct IP address with the net-

work administrator to set the correct one.

While attempting to

download a document

using the network

scanner (with the

same subject in the

same scan box from

another computer)

the document cannot

be seen from the net-

worked computer, only

the directly connected

PC.

Has the “Delete

after download” been

selected?

If this box has been checked, multiple users

cannot check the same document.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare