Nikon MFX-1930 Bedienungsanleitung PDF herunterladen (Seite 16)

4-2 Network Interface

The machine prompts you to enter the name of the scan box.

01:Box Name;Upper

01_

The box number is pre-installed as the box name. Press [Cancel] to delete

it and enter your desired name by using the numeric keys. Names can

contain up to 16 characters.

Press [Enter]. The machine now prompts you to enter the four-digit secu-

rity I.D. code for your scan box. If you set the I.D. code to anything other

than 0000, you will be required to enter it when you access the scan box

to modify the settings or download a scanned ﬁle to your computer.

01:Set Scan Box

Enter I.D. Code:

0000

Use the numeric keys to enter the four-digit I D. code (0001 to 9999) and

don’t forget your security I.D. code.

If you do not want to set the security I D. code, enter 0000.

Press [Enter] to save the setting.

To setup another scan box, repeat the procedures from step 2.

To exit, press [Reset].

4.2.2 Modify a scan box

Press [Menu], [3], [7], [1], then [Enter].

Press [ ] or [ ] to select the scan box.

Press [Enter].

If the I.D. code is anything other than 0000, the machine asks you to

enter the four-digit number.

01:Set Scan Box

Enter I.D. Code:

****

Use the numeric keys to enter the proper I.D. code and then press

[Enter].

A valid I.D. code must be entered to continue the operation.

Modify the scanbox name.

Press [Enter]. The machine prompts you to enter the I.D. code.

If you want to change the I.D. code, enter a new code.

If you want to disable the password requirement, enter 0000.

Press [Enter] to save the settings and press [Reset] to exit and return to

standby mode.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 49 50

Keine Kommentare

Nikon MFX-1930 Bedienungsanleitung Seite 16