Nikon fe Bedienungsanleitung PDF herunterladen (Seite 9)

PREPARATION FOR USE—continued

Prior to Shooting

Fold out the film rewind crank, and turn it gently in the

direction of the engraved arrow until you feel a slight

resistance; this will indicate that any slack in the film

cartridge has been taken up. Then, fold the rewind crank

into place.

Advance the film (refer to page 12 for film advance oper

ation), and make two blank exposures; this will dispose

of the initial portion of the film exposed during loading.

As you advance the film, confirm that the rewind crank

turns in the direction opposite the arrow. This indicates

that the film has been loaded properly and is being

advanced.

5»vV:

After advancing the film two frames, check that the

frame counter is at “0”; then, advance the film one more

frame to prepare the camera for taking the first picture.

Note: Setting the shutter-speed dial to a manual position (rather

than “AUTO”) will speed up film loading by preventing the

camera from selecting a slow speed, as might be the case when

the lens cap is in place. However, be sure to reset the dial to

“AUTO” if automatic operation is desired.

When load

ing film

1 St blank

exposure

2nd blank

exposure

3rd blank expo

sure; now ready

for 1 St shot

Distributed by WWW.LENSINC.NET

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 48 49

Keine Kommentare

Nikon fe Bedienungsanleitung Seite 9