Nikon fe Bedienungsanleitung PDF herunterladen (Seite 37)

MULTIPLE EXPOSURES

Intentional multiple exposure (two or more exposures

on the same frame) for creative effects are easy with the

FE. First, make the initial exposure. Then pull back the

multi-exposure lever as far as it will go, and while

holding it, stroke the film-advance lever. The multi

exposure lever needs to be held in only during the

beginning of the advance lever stroke. Repeat this pro

cedure for each additional exposure on the same frame.

When you have achieved the desired number of ex

posures on the same frame, release the lever and stroke

the film-advance lever once more. Note that during

multiple exposure operation, both the camera’s shutter

speed and the lens aperture can be changed to any

setting. The frame counter will remain at the same

setting until the multi-exposure lever is released—a

convenient way of confirming that multiple exposure

operation is proceeding properly.

For motor-driven multiple exposures. In combination

with the optional MD-12 Motor Drive Unit, simply pull

back the multi-exposure lever while firing off the desired

number of frames either in the “Single” or “Continuous”

mode. After releasing the lever, cover the lens with a lens

cap and make a blank exposure to get the film ready for

the next shot.

Distributed by WWW.LENSINC.NET

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 48 49

Keine Kommentare

Nikon fe Bedienungsanleitung Seite 37