Nikon 58-104 Bedienungsanleitung PDF herunterladen (Seite 39)

Alert Signal Lamps

A warning is indicated when any of

the lamps in the illustration starts

blinking. Look up the cause of the

problem below and follow the

procedures given to fix it.

Ready-light blinks.

If the exposure is not suffioient when the

flash is fired at full output, the SB-104’s

ready-light blinks for about three seconds

to alert you immediately after the flash is

fired in TTL mode. (The ready-light in the

viewfinder will also blink.)

—In this event, reduce the distance between

the camera and the subject, or select a

smaller f-number.

♦Note

Flash power may vary due to surrounding

conditions — with unusually dark subjects,

for example — even though flash shooting

distance settings are the same. A warning

may thus appear if the subject is at the far

end of the flash shooting distance range but

still within it.

Moisture alert light blinks.

This alert indicator blinks when water has

entered the battery chamber. Operation of

the SB-104 stops automatically.

—Bring the Speedlight to a Nikon service

center to have it checked.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

Keine Kommentare

Nikon 58-104 Bedienungsanleitung Seite 39