Nikon fe2 Bedienungsanleitung PDF herunterladen (Seite 24)

Automatic exposure photography

aperture priority shooting

With the FE2 set at A, you select the f/stop and the electronically

controlled nnetering circuit matches it with the correct stepless

shutter speed. The A mode is especially useful, because it

allows you to control depth of field while using the camera on

automatic to assure perfect exposure. Deeper depth of field

(or a greater zone of sharp focus in front of and behind the main

subject) is achieved as you stop down the lens to smaller aper

tures (indicated by numerically larger f-numbers). Shallower

depth of field (where the focus is restricted to the main subject)

results when larger apertures are used. (Refer to page 38 for

more information.)

Shooting on auto

1) Set the shutter speed/mode selector dial at A.

2) Set the desired f/stop on the lens.

3) Look through the viewfinder and place the main subject in the

center of the frame.

4) Pull out the film advance lever and depress the shutter re

lease button halfway.

5) Confirm the position of the meter needle. If the shutter speed

is above 1/30 sec., but not over 1/4000 sec., depress the

shutter release button all the way. The correct exposure will

be obtained.

Distributed by WWW.LENSINC.NET

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 65 66

Keine Kommentare

Nikon fe2 Bedienungsanleitung Seite 24