Nikon fe2 Bedienungsanleitung PDF herunterladen (Seite 12)

•

4 o Make blank exposures until the frame

counter 59 reaches frame “1,”

The film advance lever doubles as a shutter release button lock:

to unlock the shutter release button pull out the film advance

lever to the standoff position as shown in the photo. To dispose

of the first few frames exposed during film loading, continue to

alternately advance the film and depress the shutter release

button until the frame counter reaches frame “1.” Check that

the rewind knob is rotating, indicating the film has been loaded

correctly and is being advanced. If the knob does not rotate,

reload the film.

Notes:

1) Set the shutter speed/mode selector dial (i9; to A or a fast shutter speed

while making blank exposures.

2) Up to frame “1," the meter needle in the viewfinder does not move and

this indicates that the meter is not functioning; therefore do not take

pictures prior to the first frame.

■ li

14 Press the shutter

release button

lightly to switch the

exposure meter on.

The shutter release button activates the

exposure meter when lightly pressed.

The meter stays on for approx. 16 sec.

after you have taken your finger off the

button.

Distributed by WWW.LENSINC.NET

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 65 66

Keine Kommentare

Nikon fe2 Bedienungsanleitung Seite 12