Nikon SB-27 Bedienungsanleitung PDF herunterladen (Seite 61)

(Cameras in Groups I thru III)

Setting exposure compensation for flash

The setting method varies depending on the camera.

Cameras in Groups I and II

Cameras with EV compensation control capability allow you to

compensate flash exposure on either the SB-27 or the camera (or

both.) If you use both controls, exposure is modified by the sum

total of both exposure compensation values.

For example, with a compensation of +1EV on the SB-27 and +1EV

on the camera, the background will be +1EV and the flash output

will be +2EV. Keep in mind that the SB-27's exposure compensa-

tion value indicator will not display the sum total of both

compensation values. Only the compensation value set on the

SB-27 is displayed.

Setting exposure compensation on the SB-27

TTL

ZOOM

ISO

ft m

0.6

1) Simultaneously press the “F” and “M” buttons .

2) Confirm the exposure compensation value indicator in the LCD

panel appears after blinking for approx. 4 sec.

3) To set the desired exposure compensation, press the “F” button

to increase the compensation value and press the “M” button to

decrease the compensation value.

4) The exposure compensation indicators ¿ and exposure

compensation value come on.

Exposure compensation is possible in 1/3 EV steps. (“–” side:

from –0.3 to –3.0 EV, and “+” side: from +0.3 to +1.0 EV) .

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 91 92

Keine Kommentare

Nikon SB-27 Bedienungsanleitung Seite 61