Nikon D4S Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kamera Blitze Nikon D4S herunter. Nikon D4S User manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Addenda to the D4S User’s Manual
Your D4S is equipped with the latest  rmware (version C 1.20), which o ers
the following features not described in the Users Manual.
Time” (
Time” (
0
0
132–133)
132–133)
Shooting no longer ends automatically after 30 minutes when Time” is se-
lected for shutter speed. To close the shutter and end shooting, press the
shutter-release button all the way down.
Custom Setting d3: Max. Continuous Release (
Custom Setting d3: Max. Continuous Release (
0
0
327)
327)
The maximum number of shots is ignored when shutter speeds of 4 s or
slower are selected in mode
f
or
h
.
Custom Setting e3: Optional Flash (
Custom Setting e3: Optional Flash (
0
0
332)
332)
The D4S now supports optional SB-500  ash units. Custom Setting e3 (Op-
tional fl ash) o ers a Commander mode option when an SB-500 is attached.
Commander Mode
Use a camera-mounted SB-500 as a master  ash controlling one or more
remote optional  ash units in up to two groups (A and B) via Advanced Wire-
less Lighting.
Selecting Commander mode displays the menu
shown at right. Press
4
or
2
to highlight the fol-
lowing options and
1
or
3
to change. Compose
the shot and arrange the  ash units as shown in the
SB-500 manual.
Option
Option
Description
Description
Optional
Optional
ash
ash
Choose a fl ash mode for the SB-500 mounted on the camera accessory
shoe (the master fl ash).
TTL
TTL
i-TTL mode. Choose fl ash compensation from values between +3.0 and
–3.0EV in increments of ⁄EV.
M
M Choose the fl ash level.
The master fl ash does not fi re, although remote fl ash units do. The master
ash must be on so that it can emit monitor pre-fl ashes.
Group A
Group A Choose a fl ash mode for all fl ash units in group A.
TTL
TTL
i-TTL mode. Choose fl ash compensation from values between +3.0 and
–3.0EV in increments of ⁄EV.
AA
AA
Auto aperture (available only with compatible fl ash units). Choose fl ash
compensation from values between +3.0 and –3.0 EV in increments of
⁄EV.
M
M Choose the fl ash level.
The fl ash units in this group do not fi re.
Group B
Group B
Choose a fl ash mode for all fl ash units in group B. The options available are
the same as those listed for Group A, above.
Channel
Channel
Choose from channels 1–4. All fl ash units in both groups must be set to
the same channel.
En
❚❚
A
Flash Compensation
The fl ash compensation value selected with the
M
button and sub-command dial
is added to the fl ash compensation values selected for the master fl ash (Optional
ash), group A, and group B in the Commander mode menu. A
Y
icon is dis-
played in the control panel and viewfi nder when a fl ash compensation value other
than ±0 is selected for Optional fl ash> TTL. The
Y
icon fl ashes when the master
ash is in mode M.
D
Commander Mode
Position the sensor windows on the remote fl ash units to pick up the light from the
master fl ash (particular care is required if the camera is not mounted on a tripod). Be
sure that direct light or strong refl ections from the remote fl ash units do not enter the
camera lens (in TTL mode) or the photocells on the remote fl ash units (AA mode), as
this may interfere with exposure even when – – is selected for Optional fl ash. To
prevent timing fl ashes emitted by the master fl ash from appearing in photographs
taken at short range, choose low ISO sensitivities or small apertures (high f-numbers).
After positioning the remote fl ash units, take a test shot and view the results in the
camera monitor.
Although there is no limit on the number of remote fl ash units that may be used, the
practical maximum is three. With more than this number, the light emitted by the
remote fl ash units will interfere with performance.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1

Addenda to the D4S User’s ManualYour D4S is equipped with the latest  rmware (version C 1.20), which o ers the following features not described in t

Kommentare zu diesen Handbüchern

Keine Kommentare