Nikon MB-D14 Bedienungsanleitung PDF herunterladen (Seite 22)

Using the Battery Pack

Attaching the Battery Pack

Before attaching the battery pack, be sure that the camera is o and that the MB-D14

control lock (Figure A-

) is in the L position (the illustrations show the D600).

1 Remove the contact cap (Figure A-

) from the battery pack.

2 The contacts for the MB-D14 are in the base of the camera, where they are pro-

tected by a contact cover.

Remove the contact cover as shown in Figure B-

and

place it in the contact cover holder on the MB-D14 (Figure B-

3 Position the MB-D14, keeping the MB-D14 mounting screw (Figure C-

) aligned

with the camera tripod socket (Figure C-

) and tighten the attachment wheel by

rotating it in the direction shown by the LOCK arrow (Figure D).

There is no need

to remove the battery from the camera before connecting the MB-D14.

At default

settings, the battery inserted in the camera will be used only after the battery in the

MB-D14 is exhausted.

The

Battery order

option in the camera Custom Settings

menu (Group d) can be used to change the order in which the batteries are used.

Be sure to place the camera contact cover in the contact cover holder and to keep

the MB-D14 contact cap in a safe place to prevent loss.

A PB-6D and PK-13 auto-extension ring are required when using PB-6 bellows fo-

cusing attachment with the MB-D14.

Removing the Battery Pack

To remove the MB-D14, turn the cam-

era o and set the control lock on the

MB-D14 to L, then loosen the attachment

wheel and remove the MB-D14.

Be sure

to replace the contact cover on the cam-

era and the contact cap on the MB-D14

when the battery pack is not in use.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 155 156

Keine Kommentare

Nikon MB-D14 Bedienungsanleitung Seite 22