Nikon D100 Bedienungsanleitung PDF herunterladen (Seite 45)

Tutorial—Basic Photography

Taking Your First Photographs

When Lighting Is Poor

When lighting is poor, shutter speed slows and photographs may be blurred. At shut-

ter speeds slower than

s, you can use the built-in Speedlight to prevent blur. A flash

can also be used to “fill in” (illuminate) shadows and back-lit subjects ( 94). To use

the built-in Speedlight:

Raise the Speedlight

Press the Speedlight lock release. The Speedlight will

pop up and begin charging.

Set the flash-sync mode to front-curtain sync

Press the button and rotate the main command dial until is displayed in the

control panel.

Check the flash-ready indicator in the viewfinder

Press the shutter-release button halfway and check

the flash-ready indicator in the viewfinder. When

the built-in Speedlight is raised, photographs can only

be taken when the flash-ready indicator is displayed.

If the flash-ready indicator is not displayed, remove

your finger briefly from the shutter-release button

and try again.

When the Speedlight Is Not in Use

To save battery power when the Speedlight is not in use, return it to the closed position

by pressing it lightly downward until you hear the latch click into place.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 211 212

Keine Kommentare

Nikon D100 Bedienungsanleitung Seite 45