Nikon Coolpix P50 Bedienungsanleitung PDF herunterladen (Seite 25)

Inserting Batteries

First Steps

B Replacing Batteries

Turn the camera off and make sure that the power-on lamp and the monitor are off before opening

the battery-chamber/memory card slot cover to remove or insert batteries.

B Additional Precautions Regarding Batteries

• Read and follow the warnings for batteries on pages iii and the section, “Caring for the Camera”

(A 122).

• Do not combine old and new batteries or batteries of different makes or types.

• Batteries with the following defects cannot be used:

B Battery Type

To improve battery performance, select the type of battery currently inserted in the camera in the

setup menu. The default setting is [Alkaline]. When any other type of battery is used, turn the camera

on and change the setting (A 117).

C Alkaline Batteries

Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a

reliable brand.

C AC Adapter

The AC Adapter EH-65A (available separately from Nikon) can be used to power the COOLPIX P50

from an electrical outlet. Do not, under any circumstances, use another make or model of AC

adapter. Failure to observe this precaution could result in overheating or in damage to the camera.

D Auto Power-Off in Shooting Mode (Standby Mode)

The monitor will dim to reduce the drain on the batteries if no operations are performed for about

five seconds. The monitor will brighten when camera controls are used. At default settings, the

monitor will turn off altogether if no operations are performed for about 30 seconds during shooting

and playback. The camera will turn off automatically if no operations are performed for another

three minutes (A 113).

Batteries with peeling Batteries with insulation

that does not cover the

area around the negative

terminal

Batteries with a flat

negative terminal

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 151 152

Keine Kommentare

Nikon Coolpix P50 Bedienungsanleitung Seite 25