Nikon FG Bedienungsanleitung PDF herunterladen (Seite 8)

4 O Make blank exposures until the

frame counter 39 shows “1.”

To dispose of the first few frames exposed during film

loading, continue to alternately advance the film and

depress the shutter release button until the frame

counter shows "1." Check that the rewind knob is

rotating, indicating the film has been loaded correctly

and is being advanced. If the knob does not rotate,

reload the film.

Note: Do not lake pictures prior to frame "1" as the meter

does not function until the counter reaches "I." Up to

the 1/60 and 1/125 sec. LEDs in the viewfinder wilt blink,

showing the shutter is aulomatically set at 1/90 sec.

A A Set the ASAIISO film speed

dial 29’.

Lift up the ASA/ISO film speed dial and rotate it

either direction until the index dot is opposite the fil

speed in use. Make sure the exposure compensatii

dial Is set at "0.” These actions are essential to ac

vate the camera’s exposure meter for correct exp

sure of the film being used.

Note: Film speed is printed on the film package and cart ride

•i ^ Ibrn the audio warning lever w

■ ■ ■ to switch it on.

Turn the lever as far as it will go, uncovering the audio

warning mark(’^,/).

1A Hold the camera steady.

Fold out the film advance lever to the stani

off position. With your right hand grasping the ham

grip ® steadily and your right index finger restir

comfortably on the shutter release button, positic

your right thumb between the camera body and th

lever. Then cradle the camera in the left hand with tt

thumb and fingers holding the lens focusing ring. Th

camera may be switched from horizontal- to vertici

format shooting in this position.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 33 34

Keine Kommentare

Nikon FG Bedienungsanleitung Seite 8