Nikon FG Bedienungsanleitung PDF herunterladen (Seite 22)

~ilm Advance Lever <

The film advance lever is coaxial with the shutter re

lease button and is specially contoured to fit the

thumb. A hinged lever, it fits snugly to the camera

body. It has a throw of 144*. and is operated in one

complete stroke or a series of shorter ones. After

completion of film winding, the lever quick-returns to

the stand-off position when your finger is taken off

the lever.

Notes:

1) At the end of the roll the lever will not wind. In this case,

don't force the lever, just release your linger, depress the

film rewind button ®and rewind the Him.

?) Be sure to release your linger from the shutter release

button while advancing the film to prevent taking a picture

accidentally at the instant the film is advanced.

Frame Counter 39

To keep track of the number of exposed frames, th

frame counter is graduated from S (Start = tw

frames below 0) to 36. After “1," and starting fror

“2," every two frames are numbered in white wit

white indices in between. When making blank shot

with the shutter speed/mode selector set at othe

than M90 and B. the 1/60 and 1/125 sec. LEDs w

blink until the frame counter reaches "1," showin

that the shutter is firing at 1/90 sec. Only after "1

will both the meter and viewfinder information wor

normally. Ddn t take pictures until the frame countr

reaches “1." The frame counter automatically reset

to "S" when the camera back is opened.

ASA/ISO Film Speed Dial ^

The scale on the ASA/ISO dial has numbered settings

for speeds from ASA/ISO 12 to 3200. Two dots be

tween each number stand for intermediate settings,

such as 64, 80, etc. The 64, 100 and 400 settings are

indicated in red. The table gives the speeds for all

intermediate settings. To set the film speed in use, lift

up the dial and rotate it until the desired number (or

dot representing the film speed) click-stops opposite

the index dot ®,

ASA/ISO is a numerical rating of the film's sensitivity

to a given amount of light. The higher the number, the

greater the sensitivity, and vice versa. The film’s AS/

ISO is indicated on the cartridge itself, on the filt

carton and on the data sheet packed inside.

This dial can also be used to compensate exposure

as In the following example: with ASA/ISO 100 file

set the dial to 50 to overexpose -i-1 step: to 25 fc

+ 2 steps; to 200 for -1 step; to 400 for -2 step;

After compensated shootings, be sure to return th

dial to the film’s original speed.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 33 34

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon FG Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kameras Nikon FG