Nikon R1 Bedienungsanleitung PDF herunterladen (Seite 97)

z Other functions

t In Manual flash mode

In Auto FP High-Speed Sync in Manual flash mode, the SB-R200’s flash output level may be

extremely low when the manual flash output level is set to a low value. However, this is not a

malfunction. Flash output level may also vary depending on the subject matter conditions.

Guide number in Auto FP High-Speed Sync using the SB-R200 (m/ft)

• The guide number in Auto FP High-Speed Sync above is applicable when the shutter

speed is set at 1/500 sec.

• The guide number in Auto FP High-Speed Sync above varies according to shutter speed.

For example, when the shutter speed changes from 1/500 sec. to 1/1000 sec., the guide

number decreases by 1 EV. This means that the higher the shutter speed, the lower the

guide number.

Flash output

level

ISO sensitivity

25 50 100 200 400 800 1600

M1/1 1.4/4.6 2.0/6.5 2.8/9.2 4.0/13.1 5.6/18.5 8.0/26.2 11.3/37.1

M1/2 1.0/3.2 1.4/4.6 2.0/6.5 2.8/9.2 4.0/13.1 5.6/18.5 8.0/26.2

M1/4 0.7/2.3 1.0/3.2 1.4/4.6 2.0/6.5 2.8/9.2 4.0/13.1 5.6/18.5

M1/8 0.5/1.6 0.7/2.3 1.0/3.2 1.4/4.6 2.0/6.5 2.8/9.2 4.0/13.1

M1/16 0.3/1.1 0.5/1.6 0.7/2.3 1.0/3.2 1.4/4.6 2.0/6.5 2.8/9.2

M1/32 0.2/0.8 0.3/1.1 0.5/1.6 0.7/2.3 1.0/3.2 1.4/4.6 2.0/6.5

M1/64 0.1/0.5 0.2/0.8 0.3/1.1 0.5/1.6 0.7/2.3 1.0/3.2 1.4/4.6

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 133 134

Keine Kommentare

Nikon R1 Bedienungsanleitung Seite 97