Nikon R1 Bedienungsanleitung PDF herunterladen (Seite 72)

3 Procedures for close-up flash operation

Setting a channel number on the SU-800.

Set the communication channel numbers of the

SU-800 and SB-R200. Press the [SEL](FUNC.)

button to display the channel number. Press the

[W] or [X] button to set the channel number

(blinking). Press the [SEL](FUNC.) button once

again and the channel number stops blinking. The

last channel number to blink is the one that has

been set automatically.

• Select one of the four available channels. The same

channel number is set for all groups.

• The channel number blinks during adjustment and

stops after blinking six times unless an adjustment is

made. The last channel number to blink is the one that

has been set automatically.

Setting a channel number on the SB-R200.

Rotate the [CHANNEL] select dial on the SB-R200

to set the channel number. Be sure to set the

same channel number as set on the SU-800.

Setting a group on the SB-R200.

Rotate the [GROUP] select dial on the SB-R200 to

set the group. Once set, the SB-R200 operates

according to the controls as set on the SU-800.

Compose a picture and shoot with flash.

Confirm that the red ready-lights on the SU-800

and SB-R200 are on, then release the shutter.

• For details on test firing, refer to page 88.

CHANNEL

GROUP

READY

LOC

SEL

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 133 134

Keine Kommentare

Nikon R1 Bedienungsanleitung Seite 72