Nikon EH EL2 Bedienungsanleitung PDF herunterladen (Seite 42)

CHANGING THE LENS

To remove the lens from the camera body, press the lens

release button and, holding the button depressed, twist

the lens clockwise as far as it will go. With this action,

the lens will come loose and can be lifted out.

To mount a lens fitted with a meter coupling ridge,

perform the following: Check that the meter coupling

lever is released (see "Coupling Lever Lock/Release

Operation"

on page 43 for details); position the lens

in the camera's lens mounting flange so that the

mounting indexes on the lens and camera body are

aligned;

and,

then,

twist the lens counterclockwise

until it clicks and locks into place. These steps provide

for full mounting of the lens, while simultaneously

indexing the lens' maximum aperture setting to the

camera's metering circuit.

To mount a lens not fitted with a meter coupling ridge,

first lock the meter coupling lever in the up position

(again,

see "Coupling Lever Lock/Release Operation"

for details). Then mount the lens and lock it into

posi-

tion as explained previously. For operation with lenses

not fitted with a meter coupling ridge, stop-down mea-

surement (as described on page 32) is required.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 48

Keine Kommentare

Nikon EH EL2 Bedienungsanleitung Seite 42