Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED Bedienungsanleitung PDF herunterladen (Seite 21)

■ Setting the vibration reduction ON/OFF switch

1Set the Vibration reduction ON/OFF switch ( to [ON].

Note: Be sure to set the switch so that the indicator

aligns with [ON] precisely.

2Vibration is reduced when the shutter release button is

lightly pressed. Because vibration is reduced in the viewfinder, auto/manual

focusing and exact framing of the subject are made easier.

3To cancel the vibration reduction mode, set the Vibration reduction

ON/OFF switch ( to [OFF].

■Setting the vibration reduction mode switch &

NORMAL:The vibration reduction mechanism primarily

reduces camera shake, making smooth panning

shots possible.

ACTIVE: The vibration reduction mechanism reduces

camera shake when taking pictures and those

from a moving vehicle. In this mode, the lens

does not automatically distinguish panning from camera shake.

Note: Be sure to set the switch so that the indicator aligns with

[NORMAL] or [ACTIVE] precisely.

■Notes on using vibration reduction

•Wait until the image in the viewfinder stops vibrating before fully

depressing the shutter release button after you have lightly pressed the

shutter release button.

•When taking panning shots, be sure to set the vibration reduction mode switch

to [NORMAL]. If you move the camera in a wide arc when panning, vibration in

the direction of that movement is not affected. For example, if you pan the

camera horizontally, only vibration in the vertical direction is reduced, making

smooth pans much easier.

•Due to the characteristics of the vibration reduction mechanism, the image

in the viewfinder may become blurred after releasing the shutter. This is

not a malfunction.

OFF

Indicator

NORMAL

ACTIVE

Indicator

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 115 116

Keine Kommentare

Nikon AF-S VR Zoom-Nikkor 70-300mm f/4.5-5.6G IF-ED Bedienungsanleitung Seite 21