Nikon WR-1 Bedienungsanleitung PDF herunterladen (Seite 17)

Fixing Units in PlaceA

The WR-1 can be mounted on the camera acces-

sory shoe as shown at right.

Once the unit is in place, it can be angled as

shown at right.

To remove the WR-1, angle it as shown in Figure 1 or 2, and then press

the release (

) and slide the unit oﬀ the accessory shoe (

). The unit

can only be removed when angled as shown.

Figure 1 Figure 2

If desired, the WR-1 can be mounted on a tripod or an optional SK-7

bracket. Using the SK-7 places the WR-1 at the same level as the cam-

era and allows pictures to be taken using the camera’s built-in ﬂ ash

or optional ﬂ ash units and other accessories to be mounted on the

camera accessory shoe.

The Accessory Shoe

The camera’s built-in ﬂ ash can not be used when the WR-1 is mounted

on the accessory shoe. If the ﬂ ash pops up automatically, select P, S, A,

or M mode and then lower the ﬂ ash to prevent it ﬁ ring.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 39 40

Keine Kommentare

Nikon WR-1 Bedienungsanleitung Seite 17