Nikon MC-36 Bedienungsanleitung PDF herunterladen (Seite 27)

The Illuminator/Lock Button

Press the illuminator/lock button () brieﬂ y to

activate the control panel backlight. The back-

light will remain lit for about six seconds; press-

ing the arrow button () while the backlight is

on extends the timer for another six seconds.

To lock all controls except the shutter-re-

lease () and illuminator/lock buttons, press

the illuminator lock button until the lock icon

(

) is displayed in the control panel. To release

the lock, press the illuminator/lock button until

the lock icon is no longer displayed.

Parts of the MC-36 (3/3) Connecting the MC-36

1 Turn the camera oﬀ .

2 Check that the “TIMER ACTIVE” () and “RE

LEASE” () indicators are not displayed.

3 Remove the 10-pin terminal cover from the

camera. Keeping the mark on the 10-pin

connector () aligned with the mark on the

camera body, insert the connector as shown

and then tighten the locking nut.

Disconnecting the MC-36

After checking that the “TIMER ACTIVE” () and “RE

LEASE” () indicators are not displayed, turn the

camera oﬀ and disconnect the MC-36. Replace

the 10-pin terminal cover.

The “TIMER ACTIVE,” “SET,” and “RELEASE” Indicators

If this  ashes It means this; do this to turn it o

TIMER ACTIVE

Timer active (page 13); press TIM

ER START/STOP button ().

SET

Settings can be modiﬁ ed (page

8); press SET button ().

RELEASE

(TIMER

ACTIVE not

ﬂ ashing)

Manual release active (page 15);

release shutter-release button

(; if button is in HOLD position,

release shutter-release lock).

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 181 182

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon MC-36 Bedienungsanleitung Seite 27

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kamerazubehör Nikon MC-36