
Attaching the UT-1 / Connecting the WT-5
Introduction6
Connecting the WT-5
The UT-1 can be used in combination with the optional WT-5
wireless transmitter to connect to wireless LANs. The WT-5
connects as described below.
1 Open the UT-1 peripheral connector
cover.
2 Fully insert the WT-5 connector into the
UT-1 peripheral connector.
3 Rotate the locking wheel to lock the WT-5
in place.
A MAC Address Filtering
If the network uses MAC address filtering and the UT-1 is connected to a
WT-5, the filter must be supplied with the MAC address of the WT-5. After
connecting the WT-5, choose Network > Options > MAC address (075)
from the camera setup menu and note the wireless and Ethernet MAC
addresses.
Kommentare zu diesen Handbüchern