Nikon F80D Bedienungsanleitung PDF herunterladen (Seite 30)

5958

Auto Exposur

e Lock

Exposure

• When you want to control the exposure of a specific area within a

scene, measure the exposure on the area with Spot or Centre-

Weighted Metering, press the ‚ button to lock the exposure, then

recompose the picture. Set exposure to a mode other than Manual.

Position focus area on subject and lightly press the

shutter release button, then press the ‚ button.

Confirm focus indicator / appears in the viewfinder.

Rotate the metering system selector to select Centre-

Weighted or Spot Metering.

• Matrix Metering is not recommended since the effect of the Auto Exposure

Lock cannot be effectively attained.

• When the ‚ button is pressed, exposure at the area of selected metering

system is locked and remains locked as long as the button is kept pressed.

• When the ‚ button is pressed, EL appears in the viewfinder.

• Area of exposure in Spot Metering:

1. When the focus area and metering area are linked in Spot Metering

(page 49), exposure is locked at selected focus area.

2. When Dynamic AF Mode with Closest Subject Priority (page 40) is

selected in Spot Metering, exposure is locked at centre focus area (page

49).

While keeping the ‚ button pressed, recompose,

focus and shoot.

• The following functions can be operated while the ‚ button is kept

pressed:

1. Flexible Program (page 51) in Auto-Multi Progam Exposure mode

2. Shutter speed adjustment in Shutter-Priority Auto Exposure mode

3. Aperture adjustment in Aperture-Priority Auto Exposure mode

In any of these three situations, controlled shutter speed and/or aperture

will be displayed after change.

• Rotating the metering system selector to another setting does not change

the metering system during Auto Exposure Lock operation. (The metering

system changes as soon as the Auto Exposure Lock is cancelled.)

c 7: Auto Exposure Lock can be set to be activated by lightly pressing

the shutter release button (page 72).

c 11: Auto Exposure Lock can be set to remain after you remove your

finger from the ‚ button. In this case, AE lock is released when

the ‚ button is pressed again (page 73).

• When the Centre-Weighted Metering is selected, exposure at 12mm-

diameter circle is locked.

• In Single Servo AF or Continuous Servo AF, focus is also locked

simultaneously (page 44). Make sure to confirm focus indicator / appears

in the viewfinder.

c 11: Only exposure can be set to be locked when the ‚ button is

pressed (page 73).

F80 (E)-Thailand 02.12.27 5:21 PM Page 58

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon F80D Bedienungsanleitung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Filmkameras Nikon F80D