Nikon F80D Bedienungsanleitung PDF herunterladen (Seite 11)

2120

Load Film

BASIC OPERATION

3.1

3.2

3.3

To change film speed with DX-coded film or select film advance mode,

see pages 36-37.

Shutter curtains are very thin. Do not touch the shutter curtains with

your finger or the film leader.

Avoid direct sunlight when changing film outdoors.

Check points

Turn the power switch on and

load DX-coded film. With DX-

coded film, film speed will be set

automatically (ISO 25-5000).

When the camera is turned on,

film is loaded and the camera

back is closed, the film

automatically advances to the

first frame.

Turn the power switch on, confirm that the film

speed setting is set to s, then open the camera

back by sliding the camera back lock release lever.

• If the film speed setting is not set to s, see page 36.

• Do not insert the film leader beyond the red index mark.

Insert film from the bottom side and pull film leader

out to red index mark.

• When 1 appears on the LCD panel, the film has advanced to the first frame.

• When Err and E blink in the LCD panel and viewfinder, film is not

properly installed. Open the camera back again and reload film.

• s and Err in the LCD panel and Err in viewfinder blink and the shutter

locks when a non-DX-coded film is loaded with camera film speed set to

s. Set film speed manually (page 36).

• Frame number display remains when the power switch is off.

• You can check the number of available exposures on the film roll through

the film cartridge confirmation window.

• Infrared films cannot be used since an infrared sensor is used for the

detection of the film frame position.

c 8: Camera can be set to advance the film to the first frame not until

the shutter release button is pressed (page 72).

Hold the film cartridge and ensure film is properly

positioned with no slack, then gently close the

camera back until the camera back snaps closed.

Film automatically advances to the first frame.

DX-coded film

ISO

(film speed)

DX mark

3.4

Set the film advance mode selector to ı (single-

frame shooting) while pressing the film advance

mode selector lock release.

NOTE: Loading/removing film

Shutter curtains are very thin. Do not

touch the shutter curtains with your finger

or the film leader.

F80 (E)-Thailand 02.12.27 5:20 PM Page 20

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 58 59

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon F80D Bedienungsanleitung Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Filmkameras Nikon F80D