Nikon LS-10 Installation Guide for Macintosh Bedienungsanleitung PDF herunterladen (Seite 58)

Troubleshooting

Following are some common problems you may encounter in the installation and

operation of your scanner. Corrective action for each problem is listed by order of most

likely cause. If a corrective action does not solve the problem, proceed to the next listed

corrective action. If the problem persists after exhausting all of the suggested corrective

actions, contact Nikon Technical Support at (516) 547-4311, or via FAX at (516) 547

0305 for assistance. Nikon Technical Support can also be contacted through the fol

lowing electronic information services at the corresponding addresses:

AppleLink Nikontech

PressLink Nikon.Tecb

America Online Nikontech

Internet

Nikontech @ AOL.COM

CompuServe GO Nikon

BBS 516-LISTENS

#1 Support Call for Coolscan. Important information for

using the fiim strip holder.

Please follow these directions to prevent unnecessary difficulty when scanning

images using the film strip holder supplied with your Coolscan:

When powering on Coolscan, make sure that the film strip holder or mounted

slide is not inserted in the scanner. Do not insert a slide or the film strip holder until the

green LED on the front of the scanner is a steady green. The scanner automatically per

forms a calibration procedure during power-up. If the scanner has film inserted, it will

affect the calibration, resulting in poor color reproduction. You will see cyan or other

color imbalances and/or receive error codes during previews and scans.

Nikon Coolscan Installation Guide for Macintosh Page 51

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 67 68

Keine Kommentare

Nikon LS-10 Installation Guide for Macintosh Bedienungsanleitung Seite 58