Nikon WT-2 Bedienungsanleitung PDF herunterladen (Seite 24)

Pairing

Once wireless network settings have been adjusted, the camera and com-

puter must be “paired” before they can communicate in PTP / IP mode for the

ﬁ rst time. “Pairing” allows the computer to control the camera by establish-

ing permissions between the two devices.

Turn the camera on.

Select PTP / IP for the Wireless LAN > Mode op-

tion in the camera setup menu ( 24).

Select On for Wireless LAN > Wireless LAN sys-

tem ( 24).

Conﬁ rm that “Now in PTP / IP mode / Waiting for

connection” is displayed in the top level of the

wireless LAN menu. For information on what to

do if an error is displayed, see “Troubleshooting”

( 50).

Press the camera button. The message shown

at right will be displayed, with the camera name

in blue ( 36).

Pairing

The camera connection list ( 36) can store the names of up to ten computers (note

that attempting to control the camera simultaneously from multiple computers may

produce unexpected results; 21). When the connection list is full, computers can be

deleted from the list to make room for additional pairings.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 186 187

Keine Kommentare

Nikon WT-2 Bedienungsanleitung Seite 24