Nikon SB-910 Bedienungsanleitung PDF herunterladen (Seite 46)

C–7

Flash Modes

Auto Aperture Flash Mode

Taking a picture in auto aperture flash mode

Make sure the actual ﬂ ash-to-

subject distance is within the

effective ﬂ ash output distance

range.

Conﬁ rm the ﬂ ash-ready

indicator is on, and then shoot.

v When insufﬁ cient ﬂ ash output for correct exposure is indicated

When the ﬂ ash-ready indicators on the SB-910

and in the camera’s viewﬁ nder blink for approx.

3 seconds after a picture is taken, underexposure

due to insufﬁ cient ﬂ ash output may have occurred.

To compensate, use a wider aperture or higher

ISO sensitivity, or move the ﬂ ash unit closer to the

subject and reshoot.

t Checking exposure before taking a picture

Test ﬁ re the Speedlight under the same conditions

and with the same Speedlight and camera settings

before taking the actual picture.

When the flash-ready indicators blink after test •

firing, underexposure due to insufficient flash

output may have occurred.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 135 136

Keine Kommentare

Nikon SB-910 Bedienungsanleitung Seite 46