Nikon SB-910 Bedienungsanleitung PDF herunterladen (Seite 112)

H–1

Tips on Speedlight Care and Reference Information

This section explains troubleshooting, Speedlight care, speciﬁ cations and optional

accessories.

Troubleshooting

If a warning indicator appears, use the following chart to determine the cause of

the problem before taking the Speedlight to a retailer or Nikon representative for

repair.

Problems with the SB-910

Problem Cause Solution

The power cannot be

turned on.

The batteries are not

correctly installed.

Insert the batteries correctly. B-6

Battery power is weak. Replace the batteries. B-7

The ﬂ ash-ready

indicator does not

light up.

The standby function is

activated.

Press the camera shutter-•

release button halfway.

Turn the SB-910 on.•

E-22

Battery power is weak. Replace the batteries. B-7

The SB-910 does

not ﬁ re.

The ﬂ ash function is canceled

in the custom settings

Activate the ﬂ ash function in

the custom settings.

B-18

The effective ﬂ ash

output distance range

does not appear.

The ﬂ ash head is not set to

the forward-facing position.

Set the ﬂ ash head to the

forward-facing position.

B-9

Aperture and ISO sensitivity

information has not been

received from the camera.

Check camera settings.•

Detach and reattach the •

SB-910 to the camera.

—

The SB-910 cannot receive

focal length information from

the camera.

Turn the SB-910 and camera

off, and then turn them on

again.

—

Zoom head position is

not set automatically.

The built-in wide panel is in

use or the Nikon Diffusion

Dome is attached.

Remove the built-in •

wide panel or the Nikon

Diffusion Dome.

Allow the zoom head •

position to be manually set

in the custom settings.

B-20

E-6

E-10

Power zoom function

is canceled.

Activate the power

zoom function.

E-19

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 135 136

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon SB-910 Bedienungsanleitung Seite 112

Kommentare zu diesen Handbüchern