Nikon SB-900 Bedienungsanleitung PDF herunterladen (Seite 119)

F–3

F

Tips on Speedlight care and reference information

Warning indicators

Warning indicator Cause Solution

Ref.

page

“Battery Power Weak”

indicator appears.

All operations have stopped

due to low battery power.

Replace the batteries.

k

C-27

Warning beeps sound and

warning icon appears when

the camera’s shutter release

button is pressed.

The SB-900’s temperature

rises and the SB-900 may be

damaged.

Wait until the SB-900 cools

down naturally.

k

F-6

“Thermal Cut-out” indicator

appears.

All operations have stopped

because the SB-900’s

temperature has risen

and the SB-900 may be

damaged.

Wait until the SB-900 cools

down naturally.

k

F-6

“Safety circuit activation”

indicator appears.

All functions other than the

power switch are inoperable

because of power

abnormalities.

Turn off the power, remove

the batteries, and contact

your retailer or Nikon

representative.

—

The ready-light blinks

after ﬁ ring.

Underexposure may have

occurred even with the ﬂ ash

ﬁ ring at maximum output.

Use a wider aperture or

move closer to the subject

and reshoot.

k

D-4

k

D-7

k

D-10

k

D-13

k

D-42

Warning beeps sound for

approx. three seconds in the

remote ﬂ ash unit.

Underexposure may have

occurred even with the ﬂ ash

ﬁ ring at maximum output.

Use a wider aperture,

move closer to the subject

or change the position

of the remote ﬂ ash unit

and reshoot.

k

D-42

“Filter detection failure”

indicator appears.

The attached color ﬁ lter has

not been detected.

Conﬁ rm whether the color

ﬁ lter is correctly attached.

k

D-34

The lens aperture is beyond

ﬂ ash distance range.

Reset the aperture. —

The lens aperture is not set

at minimum.

Set the aperture

to minimum.

—

The camera is turned off. Turn the camera on. —

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 141 142

Kommentare zu diesen Handbüchern

Keine Kommentare