Nikon SB-900 Bedienungsanleitung PDF herunterladen (Seite 91)

D–41

Flash modes and functions

Take care not to let light from the remote flash unit enter the camera

lens directly or indirectly in i-TTL auto flash mode. Also, prevent light

from entering the master flash unit’s light sensor window for Non-TTL

auto flash (in Auto Aperture or Non-TTL auto flash mode). Otherwise,

the correct exposure cannot be obtained.

There is no limit to the number of remote flash units that can be used

together. However, when using many remote flash units, light may be

unintentionally picked up by the light sensor of the master flash unit

and interfere with correct operation. The practical number of remote

flash units for wireless multiple flash shooting are three. In Advanced

Wireless Lighting, for practical purposes, the number of remote flash

units should be limited to three for one group.

Use the provided Speedlight Stand AS-21 for stable placement of the

remote flash units.

Be sure to perform test firing after setting up all flash units.

•

Using the Speedlight Stand

Use the provided Speedlight Stand AS-21 for stable placement of the remote flash units.

■

Attach the SB-900 to the Speedlight Stand in the same way that you attach

it to the camera’s accessory shoe. The same is true when detaching it from

the camera.

Speedlights SB-15 and SB-27 cannot be used with the AS-21.

•

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 141 142

Keine Kommentare

Nikon SB-900 Bedienungsanleitung Seite 91