Nikon D2H Bedienungsanleitung PDF herunterladen (Seite 97)

Taking Photographs—Exposure

Exposure Mode

Exposure mode determines how the camera sets shutter speed and aperture

when adjusting exposure. Four modes are available: programmed auto (P),

shutter-priority auto (S), aperture-priority auto (A), and manual (M).

CPU Lenses

When using a CPU lens equipped with an aperture ring, lock the aperture ring at the

min i mum aperture (highest f/-number). At other settings, the shutter release will be

dis abled and a blinking will appear in the aperture displays in the top control panel

and viewﬁ nder. Type G lenses are not equipped with an aperture ring.

Depth-of-Field Preview

To preview the effects of aperture, press and hold the

depth-of-ﬁ eld preview button. The lens will be stopped

down to the aperture value se lect ed by the cam era in

programmed auto or shutter-priority auto, or the val ue

cho sen by the user in ap er ture-pri or i ty auto or manual

ex po sure mode, al low ing depth of ﬁ eld to be previewed in the viewﬁ nder (if the op-

tional SB-800 Speedlight is attached, a modeling ﬂ ash will be emitted).

b1—ISO Auto ( 182)

When On is selected for Custom Setting b1 (ISO auto), the camera automatically

varies sensitivity in the range 200–1600 (ISO equivalent) to help ensure optimum ex po -

sure when the limits of the camera exposure me ter ing sys tem are exceeded (exposure

modes P, S, and A) or optimum exposure can not be achieved at the shutter-speed and

aperture selected by the user (exposure mode M). When sen si tiv i ty is al tered from the

value se lect ed by the user, ISO-AUTO will ﬂ ash in the rear control panel and a ﬂ ashing

ISO-A will be displayed in the viewﬁ nder. In the camera photo information display for

pictures taken at altered sensitivities, the ISO value will also be displayed in red. Note

that noise is more likely to ap pear in pho to graphs taken at higher sen si tiv i ties.

On can not be selected for ISO auto when sensitivity is set to HI-1 or HI-2; sim i lar ly,

HI-1 or HI-2 can not be se lect ed when ISO Auto is on. If a ﬂ ash is used when ISO

auto is on, ISO will be ﬁ xed at the value selected by the user. If ISO auto is on when

autoexposure bracketing is selected in exposure mode M, sensitivity will vary around

the value selected by the user as required by the bracketing program.

e4—Modeling Flash ( 195)

If Off is selected for Custom Setting e4 (Modeling ﬂ ash), the optional SB-800 will not

emit a modeling ﬂ ash when the depth-of-ﬁ eld preview button is pressed.

1 2 ... 92 93 94 95 96 97 98 99 100 101 102 ... 263 264

Keine Kommentare

Nikon D2H Bedienungsanleitung Seite 97