Nikon D2H Bedienungsanleitung PDF herunterladen (Seite 72)

Taking Photographs—White Balance

If the camera was able to measure a value for white balance, will

ﬂ ash for about three seconds in the control panels, while the viewﬁ nder

will show a ﬂ ashing .

Top control panel

Rear control panel

Viewﬁ nder

If lighting is too dark or too bright, or if some types of artiﬁ cial lighting

are used when measuring white balance using the ambient light sensor,

the camera may be unable to measure white balance. A ﬂ ashing

will appear in the control panels and viewﬁ nder for about three seconds.

Return to Step 3 and measure white balance again. If the camera is un-

able to measure white balance using the ambient light sensor, try mea-

suring white balance using a neutral gray or white reference object.

The new value for white balance will be stored in

preset d-0, automatically replacing the previous

value for this preset (no conﬁ rmation dialog will

be displayed). If white balance was set using a

reference object, a thumbnail will be displayed in

the preset white balance list. Presets measured

using the ambient light sensor are marked by a

icon.

To use the new value for white balance, select preset d-0 (if no value has

been measured for white balance before d-0 is selected, white balance

will be set to a color temperature of 5,200 K, the same as Direct sun-

light). The new white balance value will remain in preset d-0 until white

balance is measured again. By copying preset d-0 to one of the other

presets before measuring a new value for white balance, up to ﬁ ve white

balance values can be stored ( 64).

Top control panel

Rear control panel

Viewﬁ nder

d-0

d-2

SetSelect

SHOOTING MENU

d-0

d-2

SetSelect

SHOOTING MENU

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 263 264

Keine Kommentare

Nikon D2H Bedienungsanleitung Seite 72