Nikon Coolpix COOLPIXS10 Bedienungsanleitung PDF herunterladen (Seite 84)

Technical Notes

Notes on the Monitor

• The monitor may contain a few pixels that are always lit or that do not light. This is a char-

acteristic common to all TFT LCD displays, and does not indicate a malfunction. Images

recorded using the product will not be aﬀ ected.

• When you frame bright subjects, vertical comet-like streaks that whiten toward either end

may appear in the display. This phenomenon, known as “ smear,” does not appear in the ﬁ nal

photograph and does not indicate a malfunction. Some smear may appear in movies.

• Images in the monitor may be diﬃ cult to see in a bright light.

• The monitor is lit by an LED backlight. Should the monitor begin to dim or ﬂ icker, contact

your Nikon service representative.

Caring for the Camera

To ensure continued enjoyment of this Nikon product, observe the following pre-

cautions when storing or using the device.

Handle the lens and all moving parts with care

Do not apply force to the lens or monitor or to

the connector or battery-chamber/memory

card slot covers. Should the monitor break,

care should be taken to avoid injury due to

broken glass and to prevent the liquid crystal

from the display touching the skin or entering

the eyes or mouth.

Do not point the lens at strong light sources for ex-

tended periods

Avoid framing the sun or other strong light

sources for extended periods when using or

storing the camera. Intense light may cause

deterioration in the image sensor, producing

a white blur eﬀ ect in photographs.

Turn the product oﬀ before removing or disconnect-

ing the power source

Do not unplug the product or remove the bat-

tery while the product is on, or while images

are being recorded or deleted. Forcibly cutting

power could result in loss of data or in damage

to product memory or circuitry. To prevent an

accidental interruption of power, do not move

the product while the AC adapter is connected.

Keep dry

The device will be damaged if immersed in

water or subjected to high levels of moisture.

Do not drop

The product may malfunction if subjected to

strong shocks or vibration.

Keep away from strong magnetic ﬁ elds

Do not use or store this device in the vicinity

of equipment that generates strong electro-

magnetic radiation or magnetic ﬁ elds. Strong

static charges or the magnetic ﬁ elds pro-

duced by equipment such as radio transmit-

ters could interfere with the monitor, damage

data stored on the memory card, or aﬀ ect the

product’s internal circuitry.

Avoid sudden changes in temperature

Sudden changes in temperature, such as occur

when entering or leaving a heated building on

a cold day, can cause condensation inside the

device. To prevent condensation, place the de-

vice in a carrying case or a plastic bag before ex-

posing it to sudden changes in temperature.

The AF-Assist Illuminator LED

The light-emitting diode (LED; 1, 17) used

in the AF-assist illuminator conforms to the

following IEC standard:

IEC60825-1 Edition 1.2

-2001

CLASS 1 LED PRODUCT

Do not hold the camera by the lens cap

The lens cap could become detached, caus-

ing the camera to fall and damaging the

equipment.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 102 103

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon Coolpix COOLPIXS10 Bedienungsanleitung Seite 84

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Brückenkameras Nikon Coolpix COOLPIXS10