Nikon MV-1 Bedienungsanleitung Seite 10

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 124
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 9
10
Basic operation
2. Transferring shooting data in the camera to memory card for storage
CompactFlash Card
TM
EC-8CF
M
B
START
DATA READER MV-1
ACCESS ERROR
1
Turn on the camera power.
Confirm film is not loaded in the camera (E is
displayed in the frame counter) and battery power
is sufficient (x 8).
2
Press start button of the MV-1 for at least one
second.
The MV-1 access lamp will blink as it
communicates with the camera.
Folders (x 13) will be automatically created in the
memory card to store shooting data. Shooting
data recorded in the camera will be transferred
here for storage.
If data transfer completes normally, shooting data
in the camera is deleted, and the access lamp will
change from blinking to continuous for about six
seconds, then go off. Blinking of access lamp may
continue for a long time (x 11).
If the error lamp (red) blinks, it indicates a fault has
been detected. In this case, by referring to
"Blinking Error Lamp" (x 25), turn off camera
power, make sure access lamp turns off, replace
memory card if necessary, then repeat the above
procedure from step 1.
For F5 and F100 users (setting and changing recording mode)
Besides transferring shooting data, "modelist" and "modeset" folders are created
on the memory card each time the start button of the MV-1 is pressed. When the
start button is pressed, the recording mode of the F5 or F100 is set/changed after
transferring shooting data if certain files in the modelist folder are placed in the
modeset folder beforehand. With the F100, this operation is required at the
beginning since shooting data is set not to be recorded at the default setting (x
20-23).
3
Confirm access lamp is off, turn the camera
power off, remove the memory card and
disconnect the MV-1 (x 11).
Start button
Access lamp
Error lamp
MV-1 (EGFSI) 05.2.14 5:21 PM Page 10
Seitenansicht 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare