Nikon LS-2000 Bedienungsanleitung PDF herunterladen (Seite 37)

- 37 -

Using the Scanner: Using the SA-20 STRIP FILM ADAPTER

✔Cautions

• Do not attempt to insert film while scanning is in progress.

• Do not remove the adapter or turn the scanner off when

there is film in the adapter. Use the driver software pro-

vided with your scanner to eject the film.

• Do not leave film in the adapter for extended periods

• Do not move the scanner while scanning is in progress.

• Examine the film carefully prior to scanning. Film cannot be

used in the adapter if:

• there is tape on the film

• the film has been folded

• the perforations have been torn

• the film has been cut on an angle or torn

Film that cannot be used in the SA-20 can be scanned with

the MA-20 using the FH-2 film holder provided with your

scanner (see “Using the MA-20 SLIDE MOUNT ADAPTER,” above).

• Film for use in the SA-20 must be clean and free from finger-

prints. If there is dirt on the film, damage to the film could

result. Before scanning, remove dust with a blower and

gently wipe off any finger prints with a soft, dry cloth.

What to do if film jams in the adapter

If film cannot be ejected from the scanner using the software

provided or does not eject automatically after ten minutes have

passed with no operation being performed, you will need to

remove the film from the adapter by hand. The process for

clearing jams is given below.

Note: If the SA-20 jams repeatedly, clean the adapter as de-

scribed in the following section.

When no film is visible in the film slot

Step 1—Remove the adapter from the scanner

Wait until the status LED glows steadily, then slide the adapter

from the scanner. If the status LED is flashing rapidly, close all

programs and turn off the computer, then turn off your scanner

and remove the adapter.

Step 2—Open the adapter

With a coin or screwdriver, loosen the screw on top of the

adapter and open the top cover.

1. Loosen screw

2. Open adapter

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 55 56

Keine Kommentare

Nikon LS-2000 Bedienungsanleitung Seite 37