Nikon NP64 Bedienungsanleitung PDF herunterladen (Seite 25)

AUTO

ADJ.

ON/STAND BY

FOCUS

LAMP

STATUS

POWER

3. Projecting an Image (Basic Operation)

Thissectiondescribeshowtoturnontheprojectorandtoprojectapictureontothescreen.

➊

Turning on the Projector

NOTE:Beforeturningontheprojector,rstconnectthesuppliedpowercable’sthree-pinplugtotheACINoftheprojector,and

thenconnecttheotherplugofthesuppliedpowercableinthewalloutlet.Makesurethattheprojectorisinitsstandbymode

andthepowerindicatorisglowingorange.

1. Slide the lens cover to the right to uncover the lens.

2. Press the POWER (ON/STAND BY) button on the

projector cabinet or the POWER ON button on the

remote control for 1 second.

The POWER indicator will turn to green and the projec-

tor will become ready to use.

TIP:

* Turning on the projector will instantly cause the

AUTO FOCUS function to operate. (→ page 22)

* When the message “CONTROL PANEL LOCK IS TURNED

ON” is displayed, it means that the [CONTROL PANEL

LOCK]isturnedon.(→page68)

After you turn on your projector, ensure that the com-

puter or video source is turned on and that the lens

cover is open.

NOTE: Whenno signalis available, theNEClogo (default), blue,

orblackscreenwillbedisplayed.Whentheprojectordisplaysthe

NEClogo,ablueorblackscreen,theprojectorwillautomatically

switchtothe[ECO]mode.

The projector will return tothe[NORMAL] mode once a signal

connected.

STATUS

LAMP

POWER

STATUS

LAMP

POWER

STATUS

LAMP

POWER

Standby Preparing to

power on

Power On

Steady green/

orange light

Blinking green

light

Steady green

light

Seepage83formoredetails.

＋

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 106 107

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon NP64 Bedienungsanleitung Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Nikon NP64