Nikon LS-3500 - LS-3510 Bedienungsanleitung PDF herunterladen (Seite 36)

5-4 Using The Macintosh Scanner Plugin

Software Reference for Scanners

Fig. 24 Photo of Gray Step Wedge

Orientation

Portrait/Landscape

Fig. 25 Portrait/Landscape Orientation Switch

This button specifies orientation of the resulting scan from a normally

mounted original. If the original is placed in the scanner in a normal orientation as

viewed from the front, then the landscape button will produce the same orientation

on output to the screen. Depress the button to reveal the portrait icon and the

resulting scan will be rotated 90° from the position it was in the scanner film gate.

Vertical/Horizontal Flip

Fig. 26 Vertical/Horizontal Flip

After previewing the image you may wish to reverse from right-reading to

wrong-reading (i.e. a left/right flip). This is most useful when you wish to flop the

image because you have to scan it with the emulsion facing the front of the

scanner when maximum sharpness is required, avoiding scanning the image

through the base of the film. In the vertical orientation, you can save time if you

inadvertently place the film in upside-down. These buttons stay depressed for the

main scan. If there is slight speed degradation re-orienting a very high resolution

scan, it may be worthwhile to re-orient the film before scanning.

Densitometer

Fig. 27 RGB/CMY Densitometer

You can measure RGB or CMY values anywhere in the preview scan by

placing the cursor over the area of interest. Three numbers will appear at the top

of the preview frame, initially in RGB 8-bit notation (0-255). Holding down the

Command key (1) and clicking the mouse will change the notation to CMY

values from 0-100% where 100% equals maximum density.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 86 87

Keine Kommentare

Nikon LS-3500 - LS-3510 Bedienungsanleitung Seite 36