Nikon LS-1000 Bedienungsanleitung Seite 33

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 36
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 32
- 33 -
6. Troubleshooting
If something unusual should occur, please check the following
items before you assume that there is a unit failure. For more
details, refer to the Troubleshooting section of the software
manual.
Scanning cannot be performed.
Is the SCSI cable connected?
Connect the SCSI cable.
Are you using the supplied SCSI cable?
Use the supplied SCSI cable
Is the end of the connected SCSI cable terminated?
Connect the terminator.
Is the SCSI ID number different from the SCSI ID of other
devices?
Change the ID number if it is duplicated.
Are you using a recommended SCSI board ? (For Windows
version)
Use a recommended SCSI board.
Are the numbers you have set for I/O, INT and DMA for
the SCSI board different from those for other boards? (For
Windows version)
Does your system satisfy our recommended system
requirements?
Provide the recommended system.
Have you installed software?
For information on installing and operating software, refer to
the software manual provided with the unit.
Have you properly set the configuration, such as
CONFIG.SYS ?
If you have installed applications for Windows, for instance,
note that the configuration may change automatically. (For
Windows version)
Poor image quality.
Have you set the film properly?
Set the film properly.
Can you see dust on the film?
Remove dust on the film with a blower or photographic
brush.
Was the unit subjected to vibration during the scanning
operation?
Place the unit where it will not be subjected to vibration or
physical shocks.
Are you using utility software properly?
For details, please refer to the manual for your software.
The auto slide feeder display LED does not light.
Is the LS-1000 power on?
Turn on the power.
Are the LS-1000 and the auto slide feeder properly
connected?
Switch off the LS-1000 and re-connect.
Seitenansicht 32
1 2 ... 28 29 30 31 32 33 34 35 36

Kommentare zu diesen Handbüchern

Keine Kommentare