Nikon S550 Bedienungsanleitung PDF herunterladen (Seite 147)

135

Troubleshooting

Technical Notes

Electronically Controlled Cameras

In extremely rare instances, unusual characters may appear in the monitor and the

camera may stop functioning. In most cases, this phenomenon is caused by a

strong external static charge. Turn the camera off, remove and replace the battery,

then turn the camera on again. In the event of continued malfunction, contact

your retailer or Nikon-authorized service representative. Note that disconnecting

the power source as described above may result in the loss of any data not

recorded to internal memory or the memory card at the time the problem

occurred. Data already recorded will not be affected.

Electronic VR will

automatically be set to OFF

Electronic VR and Date imprint cannot be

used at the same time. When Date imprint is

selected, Electronic VR will automatically be

set to Off. Reset Electronic VR to Auto.

114

Camera settings reset Backup battery is exhausted; all settings were

restored to their default values.

109

Monitor turns off, and the

power-on lamp and flash lamp

blink rapidly.

Battery temperature is high. Turn off camera,

and allow battery to cool down before resuming

use. After the lamps blink for 30 seconds, the

camera will turn off automatically, but you can

also press the power switch to turn it off

manually.

Problem Cause/Solution A

1 2 ... 142 143 144 145 146 147 148 149 150 151 152 ... 163 164

Keine Kommentare

Nikon S550 Bedienungsanleitung Seite 147