Nikon 885 Bedienungsanleitung Seite 49

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 105
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 48
9796
3
Compose the picture
Adjust camera settings and frame the picture.
4
Start the timer
Press the shutter-release button all
the way down to activate the timer.
Press once for a ten-second delay,
twice for a three-second delay.
The self-timer lamp next to the flash
window will start to blink when the
shutter release button is pressed,
and continue to blink until one
second before the photo is taken.
The self-timer lamp will stay lit during
the final second to warn that the
shutter is about to be released.
To stop the timer, press the shutter-
release button twice with the 10-
second delay and once with the 3-
second delay.
Full press Countdown timer in
monitor shows
number of seconds
remaining until picture
is taken
Note on using self-timer
When using the self-timer with off-center subject, select “Manual” option in
“FOCUS OPTIONS > AF-Area Mode” in CSM shooting mode and select
appropriate focus area, then set the self-timer. Or, select “Close Up” in scene
mode and select appropriate focus area, then set the self-timer.
Reference—Beyond Point-and-Shoot
Throwing Light on Your Subject: The Flash
Button
The flash can be adjusted for a variety of situations, as described in
the table opposite under the heading, “When to Use It.”
To select a flash setting, press the 3 button.
When Lighting Is Poor
When lighting is poor and the flash is off (P) or set to slow sync (SLOW), pictures
may be blurred. Use of a tripod is recommended in these circumstances. At
shutter speeds of below 1/4 sec., the shutter speed indicator in the monitor will
turn yellow. Pictures taken when this indicator appears may be blurred or
slightly mottled. To prevent this, try zooming the camera out. At shutter speeds
of below 1/4 sec., noise may also appear in the dark part of the frame. This
noise in the form randomly spaced bright-colored pixels can be reduced with
the Noise Reduction settting.
Note that the flash will turn off (P) automatically when:
Autofocus is set to “Infinity” (@; p. 93)
h (landscape), j (sunset), k (night landscape), v (museum), l
(fireworks show) or z (close up) is selected in scene mode (p. 63) or the
mode dial is set to m (movie) (p. 89)
BSS is on (p. 141) or a setting other than Single is selected for
CONTINUOUS (p. 139) in CSM mode
You use lens converter (LENS) settings (p. 145)
The AE Lock option in the Exposure Options sub-menu is on (p. 148)
1
Confirm flash setting in monitor
2
Press
See p. 6 for more information on “safe flash use”.
COOLPIX885 (E) 01.10.22 6:01 PM Page 96
Seitenansicht 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 104 105

Kommentare zu diesen Handbüchern

Keine Kommentare