Nikon PD-10 Bedienungsanleitung PDF herunterladen (Seite 13)

Number of Devices That Can Be Set

•

The PD-10 can store the Profile Information

of up to 50 cameras. If 50 profiles have al-

ready been created, the oldest profile will

be deleted when storing a new profile.

•

The camera can store the Profile Informa-

tion of up to 9 devices, such as the PD-10,

computers, and printers connected to com-

puters. If 9 profiles have already been cre-

ated and the Profile Information of the

PD-10 is stored, delete an unneeded profile

first using the Wireless Camera Setup Utili-

ty provided with the camera. If an unneed-

ed profile is not deleted, the oldest profile

will be overwritten. See the camera manual

for more information on deleting profiles.

Profile names

• When the Profile Information of the

PD-10 is stored in the camera, the pro-

file name is automatically set to “Printer

x” (where x is a digit from 1 to 9).

•

The profile name “Printer

” can be

changed later using the Wireless Camera

Setup Utility provided with the camera. See

the camera manual for more information.

Turning the PD-10 Off

• The PD-10 will turn off when discon-

nected from the printer.

As soon as the message is dis-

played, press the START button on

the PD-10 for two seconds.

• Press the START button while the mes-

sage is displayed.

• The BUSY lamp on the PD-10 will blink

slowly in orange 1. After a while, the

BUSY lamp will light in orange for about

three seconds when setup is complete

After setup is complete, the mes-

sage “Ready to connect to

Printer1 Do you want to connect

now?” will be displayed on the

camera monitor.

•

Select

to return to the CHOOSE PRO-

FILE screen (

6). Select

Yes

to continue

operations and print (step 3 on

8).

•

After Profile Information is set up, the

camera and PD-10 can be connected any

number of times by choosing the Profile In-

formation from the camera CHOOSE PRO-

FILE screen. Profile Information must be set

up again when Reset (

10) is performed.

Note

If setup fails, the BUSY lamp on the PD-10 will blink rapidly in orange, and a message will be dis-

played on the camera monitor. If this occurs, press the d button on the camera, and perform set-

tings again.

LINK

Yes

Ready to connect toReady to connect to

Printer1

Do you want to connect now?

Confirm

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 119 120

Kommentare zu diesen Handbüchern

Keine Kommentare

Nikon PD-10 Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern