Nikon SB-28 Bedienungsanleitung PDF herunterladen (Seite 18)

Cameras in Groups I and II

The ISO film speed is automatically set and indicated on the SB-28’s

LCD panel.

• The usable film speed in TTL Auto Flash t mode is ISO 25 to 1000.

Cameras in Groups III through VII

Set the ISO film speed manually in this manner:

Turn the SB-28 off.

Turn it on again. The film speed starts blinking.

Press the { or } button to increase or decrease the

film speed.

—Press the [ button to stop the film speed from blinking.

• The film speed indicator blinks during adjustment and stops after 8 seconds

unless the [ button is pressed. The last blinking number is the one

automatically set.

• The following ISO film speeds can be used in TTL Auto Flash t mode :

ISO 25 to 1000 for cameras in Groups III and IV, plus F-501/N2020 and

F-301/N2000 cameras.

ISO 25 to ISO 400 for cameras in Group VI, plus F-401s/N4004s and

F-401/N4004 cameras.

Setting the ISO film speed

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 96 97

Keine Kommentare

Nikon SB-28 Bedienungsanleitung Seite 18