Nikon ARROW ID 7000 VR Bedienungsanleitung PDF herunterladen (Seite 20)

￭ Troubleshooting/Repair

If the Nikon Laser Rangefinder fails to function as expected, check the list below before consulting

your local dealer or the store where you purchased it.

● If there is a problem with the product.

Problem Cause/Solution

・Does not turn on

・Press the PWR button (top of the body).

・Check battery is inserted correctly.

・Replace the battery with a new one.

・Unable to measure

・Anomalous result

・Confirm each mode setting.

・Confirm if it can measure a large target close to you (example: a building

approx. 15m/yd. ahead of you).

・Clean the lens surface if necessary.

・Do not know if the VR

(Vibration Reduction)

function is working

・Compare the vibration of the target in the viewfinder when the Laser

Rangefinder is ON and OFF.

・ While the Laser Rangefinder is ON, the VR (Vibration Reduction) function is

always activated.

・ Cannot turn off the VR

(Vibration Reduction)

function

・The VR (Vibration Reduction) function is activated concurrently when

the Laser Rangefinder is ON. When the Laser Rangefinder is OFF, the VR

(Vibration Reduction) function automatically turns off.

・The VR (Vibration Reduction) function cannot be switched on and off.

・There are minute motion

sounds when the power

turns on and off

・Due to the VR (Vibration Reduction) system motor, minute motion

sounds occur. These sounds are normal, please continue to use the Laser

Rangefinder.

・[

] is displayed in the

internal display

・ Failure indication. Please contact your local dealer or the store where you

purchased the product.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Keine Kommentare

Nikon ARROW ID 7000 VR Bedienungsanleitung Seite 20