Nikon AF-S NIKKOR 300mm f/2.8G ED VR II Bedienungsanleitung PDF herunterladen (Seite 26)

Setting the vibration reduction mode switch

Set the vibration reduction ON/OFF ring switch to ON and choose a

vibration reduction mode with the vibration reduction mode switch.

NORMAL: The vibration reduction mechanism primarily

reduces the effects of camera shake. The

effects of camera shake are also reduced with

horizontal and vertical panning.

ACTIVE: The vibration reduction mechanism reduces the effects

of camera shake, such as that which occurs when taking

pictures from a moving vehicle, whether it be normal or more

intense camera shake. In this mode, camera shake is not

automatically distinguished from panning motion.

Notes on using vibration reduction

• If this lens is used with cameras that do not have the vibration

reduction function (p. 20), set the vibration reduction ON/OFF ring

switch to OFF. With the Pronea 600i/6i camera, in particular, battery

power may become quickly depleted if this switch is left ON.

• After pressing the shutter-release button halfway, wait until the image

in the viewfinder stabilizes before pressing the shutter-release button

the rest of the way down.

• Due to the characteristics of the vibration reduction mechanism, the

image in the viewfinder may be blurred after the shutter is released.

This is not a malfunction.

• When taking panning shots, be sure to set the vibration reduction

mode switch to NORMAL. If the camera is panned in a wide arc,

compensation for camera shake in the panning direction is not

performed. For example, only the effects of vertical camera shake is

reduced with horizontal panning.

• Do not turn the camera off or remove the lens from the camera while

vibration reduction is operating. Failure to observe this note could

result in the lens sounding and feeling as if an internal component is

loose or broken when it is shaken. This is not a malfunction. Turn the

camera on again to correct this.

• With cameras featuring a built-in flash, vibration reduction does not

function while the built-in flash is charging.

• When using a tripod, set the vibration reduction ON/OFF ring switch

to ON to reduce the effect of camera shake. Nikon recommends the

switch be set to ON when using the camera on an unsecured tripod

head or with a monopod. But when camera shake is very slight, the

vibration reduction function may conversely increase the effect of

camera shake by the movement of the system. In such a case, set the

vibration reduction ON/OFF ring switch to OFF.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 211 212

Keine Kommentare

Nikon AF-S NIKKOR 300mm f/2.8G ED VR II Bedienungsanleitung Seite 26